Gear Motor
1. When the reducer shaft is used with the mechanical connection of sprockets, conveyors and gears, the output shaft allowable O.H.L should be considered.
2. The list of allowable O.H.L value load position in the (solid shaft: the middle of the output shaft; hollow shaft: at 20mm from the end of the shaft)
3.15 than the load inertia can not be greater than 2 times the allowable shaft rotation
Classification ：
Gearmotors
Keywords ：
Gear Motor
Download ：
Products
| Model | ZS | 1 |
| Shaft diameter | 35 | 2 |
| Shaft head type | H | 3 |
| Shaft direction | L | 4 |
| Motor power | 400W | 5 |
| Reduction ratio | 15 | 6 |
| Voltage | S | 7 |
| Brake | B | 8 |
| Junction box position | G1 | 9 |
| Outlet direction | T | 10 |
| 1.Model | ZF right angle gear motor, flange mounted |
| 2.Shaft diameter | Hollow shaft type is inner diameter, solid shaft type is outer diameter |
| 3.Shaft head type | H：Hollow shaft S：Solid shaft |
| 4.Shaft outlet direction (from the wind cover) | L：Left out shaft (standard model) R：Right shaft T：Left and right shaft |
| 5.Motor power | 0.1KW 0.2KW 0.4KW 0.75KW 1.1KW 1.5KW 2.2KW |
| 6.Reduction ratio | 5-1000 |
| 7.Voltage | S：Three-phase C: single-phase |
| 8.Brake | B：with brake Blank: without brake |
| 9.Junction box position (from the airfoil cover) | G1：standard position Junction box position G2, G3, G4 can be selected |
| 10.Outlet direction (from the airfoil cover, the reducer head is front) | F：front (from the reducer head) L: left T: up B: Back (from the wind cover) (standard type) R: Right D: Down |
-
- Gear Motor
RELATED PRODUCTS
Feedback
©2023 GUANGDONG YONGKUN MOTOR CO.,LTD All rights reserved
Business license
