Four series of hardened gears
Classification ：
Four Series of Hard Tooth Surface
Keywords ：
Four series of hardened gears
Download ：
Products
3.2 Type of gear motor and gear motor with brake supply
3.2 Type of gear motor and gear motor with brake
RCR、RCF、RCK、RCS
Gear motor Gear motor
The following table shows the available types of helical, parallel shaft, helical-bevel gear and helical-worm gear motors.
| Model | Speed Reducing Motor | |||
| Helical Gear | Parallel axis | Helical Gears - Take Gears | Helical Gear | |
| Turbine worm gear | ||||
| Foot mounting | · | · | · | · |
| B5 flange mounting | · | · | · | · |
| Foot/B5 flange mounting | · | · | · | - |
| Keyed hollow shaft mounting | - | · | · | · |
| Hollow shaft mounting with locking disk | - | · | · | · |
| Hollow shaft mounting with spline | - | · | · | - |
| Hollow shaft mounting with locking disk | - | · | · | - |
| Keyed hollow shaft mounting | - | · | · | - |
| With spline hollow shaft mounting + foot mounting | - | · | · | - |
| Keyed hollow shaft mounting + B5 flange mounting | - | · | · | - |
| Hollow shaft mounting with locking disk + B5 flange mounting | - | · | · | - |
| With spline hollow shaft mounting + B5 flange mounting | - | · | · | - |
| Keyed hollow shaft mounting + B14 flange mounting | - | · | · | · |
| Hollow shaft mounting with locking disk + B14 flange mounting | - | · | · | · |
| With spline hollow shaft mounting + B14 flange mounting | - | · | · | - |
-Applicable to standard fortunately
-Not available
1、Also available with torque arm
2、Only for RCR17-RCR87
3、Only for RCK127-RCK157
Multi-stage geared motor
Specially low output speeds can be obtained with multi-stage gearheads or multi-geared motors. It is to install a helical gear reducer or geared motor at the input as a second quarter gearbox. In this case, be careful to limit the motor power according to the maximum permissible output torque of the gearhead.
Geared motor for mixing
As a special specification of helical gear motor, RCRM geared motor comes with an extended bearing box designed exclusively for mixing applications, which can be applied to withstand large radial and axial forces and even bending moments, and other data is the same as that of helical gear motor.
-
- Four series of hardened gears
RELATED PRODUCTS
Feedback
©2023 GUANGDONG YONGKUN MOTOR CO.,LTD All rights reserved
