Three major methods for selecting reduction gearboxes

Guangdong Yongkun Motor Co., Ltd. is an enterprise that develops and produces gear transmission mechanisms. The products produced by the company mainly include: micro reducers, curtain motors, low-noise curtain motors, reduction motors, reduction gearboxes, electric curtain motors, and other products. At the same time, we provide customers with services such as driver solution design, part mold design and manufacturing, part production, and integrated assembly.

The load-bearing capacity of the reducer is limited by its mechanical strength and thermal balance allowable power, so the selection of the reducer must go through two power meters. The main methods are as follows:

a) Firstly, select based on the nominal input power of the mechanical strength. If the actual input speed of the reducer is one of the four speeds (1500, 1000, 750, 600) in the load capacity table, select the reducer of the same specification based on the nominal power of that speed;

b) Shake the bucket according to the critical power of the reducer at thermal equilibrium under given conditions. Environmental temperature coefficient, hourly load duration coefficient, rated power utilization coefficient, and allowable oil temperature coefficient should be considered.

c) The nominal input power of the reducer is selected based on the load-bearing capacity limited by the strength of the micro reducer motor reducer. When the reducer is driven by an electric motor, it is necessary to consider the operating and safety factors when different prime movers drive different loads and properties;

Through years of design, development, and production in the field of gears and gearboxes, and through industry comparisons and extensive experimental testing data, we have designed and developed products such as gearboxes, DC gear motors, micro DC gear motors, planetary gear motors, and gear motors. We mainly produce micro reduction motors, micro DC motors, micro reduction motors, and DC reduction motors. Our company develops and produces planetary gearboxes and plastic planetary gearboxes according to customer requirements, which are characterized by low noise, stable voltage, and smooth transmission. There is no slipping, swinging or other phenomena.

Our micro gearbox products have gained the trust of our customers, and our quality has passed multiple inspections. We always insist on creating good products for our customers.



Guangdong Yongkun Motor Co., Ltd. is a high-tech enterprise that integrates the research and development, manufacturing, marketing, and service of micro AC gearmotors, small AC gearmotors, planetary gearboxes, robot gearboxes, gearmotors, and their integrated intelligent execution units.