Stepper motor deceleration
Release Time ：
2024-11-20
Source ：
network
Author：
Made by Guangdong Yongkun Motor Co., Ltd
A stepper motor is an electric motor that can control the rotation angle, while a reducer can reduce the speed of the motor and increase the torque. Combining the two can more accurately control the movement of the machine, especially suitable for situations that require precise positioning and control.
The installation space of the equipment is limited, and the deceleration mechanism needs to occupy a certain amount of space. For example, in small medical devices, the internal space is very compact, and the selected reduction ratio should match the size of the gearbox that can be installed. If the selected reduction ratio is too large, a larger gearbox may be required, making it impossible to install inside the equipment. So it is necessary to choose the appropriate reduction mechanism and reduction ratio based on the actual space of the equipment.
Different reduction mechanisms (such as planetary gear reducers, worm gear reducers, etc.) have different prices, and the higher the reduction ratio, the higher the cost of some reduction mechanisms may increase. When choosing a reduction ratio, cost factors should be considered, and low-cost solutions should be chosen as much as possible while meeting application requirements. For example, in some civilian products that do not require particularly high precision, cheaper deceleration mechanisms with relatively lower ratios may be chosen.
By using a reducer, the torque of the stepper motor can be increased and the speed of the motor can be slowed down, making it smoother at low speeds. This is very useful for devices that require precise control and positioning, such as 3D printers and CNC machines.
The choice of reduction ratio needs to be determined according to the specific application situation. Generally speaking, the appropriate reduction ratio can be selected based on the required speed and torque. It should be noted that excessive deceleration ratio may lead to a decrease in accuracy, so it is necessary to balance these two factors.
Stepper motor,Reducer,Gear motor
©2023 GUANGDONG YONGKUN MOTOR CO.,LTD All rights reserved
